Installation manual IP camera set

Installation manual IP camera set with power over Ethernet

You can easily connect the camera set and watch live on your smartphone or tablet by following these steps:

Connecting the cameras and NVR recorder

Connect the IP cameras and NVR recorder using the supplied UTP cables. Plug the UTP cable with the RJ45 connector into one of the four PoE ports (see image). Plug the other end of the UTP cable into the IP camera.
Connect the NVR recorder to the mains power (230v), connect the supplied mouse to one of the available USB ports, connect a monitor or television screen with an HDMI cable and switch on the recorder.
The recorder will now start up and connect to the cameras. Follow the wizard that appears on the screen.

Click on “Wizard Setup”
You'll see an overview of your network settings. Don't change anything! Click "Next."
The connected cameras with PoE will be added automatically; you don't need to do anything else. Click "Next."
Here you see an overview of the mounted hard drive. Select the hard drive and click "Format" and then "OK." As an additional security measure, you will be asked to enter the NVR username and password:
standard user = admin
default password = 123456
Then click "Format Now." After the disk is formatted, click "Next."
In this overview, you can specify when you want to record, for example, 24 hours a day or only when motion is detected. The default setting is 24 hours a day, 7 days a week. We recommend leaving this unchanged; click "Next."
A QR code will be displayed. You'll need this to watch live via the smartphone app, but you can find it later in the settings. Click "OK."
After completing the wizard, you'll be asked to change your password. This is necessary to protect the privacy of your images. Use a password of at least 10 characters. We recommend recording your new password below.

New username:	................................
New password:	................................

If you want to watch live with a smartphone or tablet, you must first connect the LAN port of the NVR recorder to a network with an internet connection using a UTP cable (not included).
Download the APP “superliveplus” for free in the Google Playstore (Android) or in the Apple store (IOS)
Go to “server list” (image 1) and click on the + icon (image 2)
Scan the QR code (image 3) and enter the username and password of the NVR recorder.
standard user = admin
default password = 123456
You can now watch live on your smartphone or tablet. If you have multiple NVR recorders, you can add them to the "server list" and also switch between locations.

If you can't connect, check whether NAT is enabled in the NVR recorder. To do this, go to Settings -> Network -> NAT in the NVR recorder.

Image 1 Image 2 Image 3

If you have any questions, please email Info@ip-camera.nl or call 085-250 0855